Power Flushing - Call Gas Angel now for our plumbing services in Newcastle Upon Tyne, Tyneside and the North East
At Gas Angel Heating Services based in the North East, we strongly believe that we cannot be beaten on price,
or quality of service when it comes to our power flushing services in Newcastle Upon Tyne and the surrounding areas.
One of our engineers can visit your home to power flush your central heating system (combi boiler only). A power flush can take anywhere between 2 and 8 hours
depending on the severity of your systems problems and we guarantee to keep
your home clean and tidy and cause the minimum amount of fuss whilst carrying
out this process for you.
Why have a powerflush?
The objective is to restore systems with circulation and boiler noise problems (caused by sludge and corrosion deposits) to optimum operation. Power flushing removes these deposits and the problems that they cause. The reasons for getting a power flush are as follows:
* To reduce radiator/system noise
* Boiler manufacturers insist on it, in order for your guarantee to be honoured when purchasing a new boiler
* To increase the efficiency of your system
* To prolong the life of components which may be damaged due to high sludge build up
* To cure cold spots in radiators
How does it work?
The Kamco CLEARFLOW® power flushing pump is simply connected into the heating system across the tails of one radiator, or wherever most practicable. The powerful flow, combined with instantaneous flow reverser device and sludge removing chemicals, will dislodge and mobilise deposits and corrosion which resist traditional system cleaning methods.
Once the corrosion and sludge deposits have been loosened and mobilised, fresh clean water is forced through the heating system, pushing the contaminated water out through a full bore dump valve to waste. During the Kamco CLEARFLOW® process, radiators are individually flushed, without removing or disconnecting them from the system, by directing the full output of the pump through each radiator separately.
At the end of the flushing process, the system contains fresh clean water and reinstatement of the system to normal operation takes only a few minutes.
System flushing will not remedy design or mechanical faults, which should be rectified, but in many cases it will cure the problems caused by these.
PLEASE NOTE THAT AT THIS TIME WE ONLY CARRY OUT POWERFLUSHING ON SYSTEMS
FITTED WITH A COMBI BOILER.
To find out more information about our power flushing services in the North East, covering Newcastle Upon Tyne, Tyneside and the surrounding areas, then please do not hesitate to get in touch with us - click here .
